Installing lawn sprinkler valves to existing system. Main wires questions or suggestions.? - sprinkler system valves
At the leading wire, the existing system, the main advantage I see power. However, all other cables in the main color of the existing valves are different. Since the package of two strands of black thread (the only black son) lead to nothing and were cut off from the power supply caps. Manual says nothing about the connection valves. All ideas about the black wire? Or how can I splice the son of the current system at the top of the valve with a valve job at a time when the system is effective? Do I get a new controller or running new cables existing controller?
Sprinkler System Valves Installing Lawn Sprinkler Valves To Existing System. Main Wires Questions Or Suggestions.?
2 comments:
The cable that goes all the valves on the agenda. The son of color who go to another thread to the valves. A colored thread through the valve. That's how you get the supply valve. It is common to find additional son of a sprinkler system. So the 2 cables that are used, not just when you need it. Then add a wire from each valve to the city, then another cable to be used in a cable. Make sure the timer is handling the additional valves in the situation.
Although you have a cable color and additional pilot valve support additional work. I wonder why you have 2 black, but unless you have a band. Typically, multi-threaded chapter is only one of each color.
To see a diagram, follow the link below
Post a Comment